5Operation of the PVPM 13
5.11.3 Menu „Transfer“
This function allows the operation of the PVPM by a connected
external PC (see also chapter 10). Terminate this function by
pressing the ESC key.
5.11.4 Menu „Service“
Brings up to the following sub menu:
5.11.4.1Menu “Select sensor”
You can select one of the sensors that are defined in the sensor
database (see chapter 10.3.4).
5.11.4.2Disp. contrast
Newer PVPM devices allows the control of the contrast voltage of the LC display by software. So the quality of
the presentation e.g. under sunlight can be optimized.
5.11.4.3Menu “Reset obj. index
Here you can reset the object index to a value of 1.
5.11.4.4Menu Set Date/Time”
Here you can set date and time of the internal clock of the PVPM1000C, but it will be much more simple to do
this with the program PVPM.disp (see chapter 10).
Operation manual for PVPM devices PV-Engineering GmbH
To Next Page
Loading...
Need help?
General