9Installing the USB device driver 21
Figure 10.4
➔ The screen in Figure 10.4 displays how Windows XP copies the required drivers.
Figure 10.5
➔ Windows will display the message that the installation was successful (Fig. 10.5). Click on “Finish” to
finish the installation for the first port of the USB device.
➔
➔ The hardware assistant may now appear a second time for the installation of a second USB port.
➔ The installation procedure will be the same as described above for the first port.
➔
➔ After the installation the new COM port appears in the device manager (Figure 10.6)
Operation manual for PVPM devices PV-Engineering GmbH
To Next Page
Loading...