How to fix poor AM/FM radio reception and noise on my PYLE Audio PLTCDN7?
If you're experiencing poor AM/FM radio reception or noise with your PYLE Audio Car Video System, it could be because the TV antenna and vehicle's radio antenna are too close. Separate the two antennas as far as possible and turn off the main unit.
Why doesn't the screen darken on my PYLE Audio PLTCDN7 when the vehicle's lights are turned on?
If the screen on your PYLE Audio Car Video System doesn't darken when the vehicle's lights are turned on, the unit may be set to auto dimmer. When the unit is set to auto dimmer, it is not linked to the vehicle's light switch. Alternatively, the illumination wire may not have been connected (if manual dimmer is set). Make proper connections.
What should I do if nothing happens when I press the buttons on my PYLE Audio PLTCDN7?
If nothing happens when you press the buttons on your PYLE Audio Car Video System, the computer chip in the unit may not be functioning normally. Press the reset button on the unit.
Why does my PYLE Audio PLTCDN7 erase memory when the ignition is turned off?
If your PYLE Audio Car Video System erases its memory when the ignition is turned off, the battery wire may not be connected to the proper terminal. Connect the wire correctly.
Why is the sound quality poor or distorted and the radio reception poor on my PYLE Audio Car Video System?
Poor sound quality or distorted audio and poor radio reception in your PYLE Audio Car Video System can occur if one of the speaker wires is being pinched by a screw in the car. Reset the fader and/or balance settings. It may also be caused by speakers not wired correctly, the car antenna not extended, or the antenna control wire not connected. Reconnect the speaker wires so that each output terminal is connected to a different speaker. Pull the antenna out all the way. Connect the wire correctly.
What to do if the remote control for my PYLE Audio PLTCDN7 does not work?
If the remote control for your PYLE Audio Car Video System isn't working, the battery may be dead. Replace the battery with one of the same rating.
Why does my PYLE Audio PLTCDN7 have no television or video image?
If no television/video image appears on your PYLE Audio Car Video System, it might be because the unit is not connected to the parking brake detection switch; make proper connections. Alternatively, the parking brake may not be engaged. For safety reasons, no television/video images are displayed while the vehicle is moving, engaging the parking brake will cause images to be displayed.
What to do if there is no sound from my PYLE Audio Car Video System, or the volume is low?
If you're experiencing low or no sound from your PYLE Audio Car Video System, first check if the attenuator is turned on and turn it off. Also, make sure that the fader or balance settings are not set all the way to one side. Finally, check if the input/output wires or wiring harness are connected incorrectly and reconnect them correctly.
General| Brand | PYLE Audio |
|---|---|
| Model | PLTCDN7 |
| Category | Car Video System |
| Language | English |
Important warnings and cautions for safe operation and handling of the unit.
Information on supported disc formats and proper handling procedures.
Detailed explanation of buttons and their functions on the main unit.
Overview of all buttons on the remote control and their respective operations.
Step-by-step guide for replacing the battery in the remote control.
How to turn the unit on/off and switch between different operating modes.
Adjusting the audio volume and using the mute function.
Instructions for opening and closing the monitor screen.
Adjusting slide position, viewing angle, and picture aspect ratio.
How to adjust Bass, Treble, Balance, and Fader levels.
Choosing the radio reception area and switching between FM/AM bands.
Manual and auto tuning, preset memory, and scan functions for radio stations.
Using the touch screen to select modes and adjust basic settings.
Procedure to recalibrate the touch screen for accurate input.
Adjusting Bass, Treble, Balance, Fader, and selecting EQ modes.
Setting up 3D sound, 4.1 channel output, and AV inputs.
Configuring clock, subwoofer volume, picture brightness, color, tint, and backlight.
Setting the radio area and switching between FM/AM bands via touch keys.
Using touch keys for tuning, storing stations, and scanning presets.
Selecting the TV system and tuning TV channels using touch keys.
Automatically storing TV channels and manual tuning procedures.
Configuring the DVD/CD changer source and understanding status indicators.
Operating playback functions like pause, stop, fast forward/backward, and track search.
Using repeat, intro, and random play modes for discs.
Configuring the navigation system input source for the unit.
Setting up and viewing the rear view camera feed.
Navigating the DVD setup menu to access various configuration options.
Configuring picture mode, angle mark, OSD language, and captions.
Setting downmix, audio output, subwoofer, dual mono, and Pro Logic modes.
Setting audio/subtitle language, parental lock, and resetting to factory defaults.
Using touch keys for playback functions like pause, fast forward, and chapter search.
Operating DVD playback using the remote control for disc menu and languages.
Utilizing slow playback, frame-by-frame, and repeat playback modes.
Using zoom, chapter/title search, and time display functions during playback.
Controlling VCD playback using touch keys for pause, fast forward, and backward.
Using the remote for slow playback, frame-by-frame, and A/B repeat.
Managing CD playback with touch keys for pause, fast forward, and track search.
Using the remote for repeat, random, and A/B section playback on CDs.
Controlling MP3 playback with touch keys for pause, fast forward, and track search.
Using the remote for repeat and random playback of MP3 files.
List of all accessories provided with the main unit and AV control box.
Step-by-step instructions for installing and removing the main unit from the vehicle.
Diagram and pinout for connecting the main unit's wiring harness.
Diagram for connecting AV devices, rear camera, and speaker outputs.
Details on connecting AV devices to the AV control box and its signal outputs.
Solutions for common issues related to power, monitor display, and audio output.
Resolving problems with disc playback, radio reception, and language settings.
Comprehensive technical data including power, dimensions, and performance metrics.
To Next Page
