Setting Mode
You can make changes to the system setting in the following area:Radio Frequency Range +
Enable/Disable AUX In+ Clock Format
- Radio Settings
The unit can operate on several different frequency ranges. Please see the following for these
ranges. To enter setting mode, input the following command by pressing remote keys" 8,
DOWN DIRECTION KEY, 9, ENTER "
The display will show "TEST MOD " breifly to indicate you are in system setting area and then
automatically change to Radio Frequency selection mode. At anytime, you can press the
DOWN ARROW to step through the above areas. When you are ready to leave the System
Setting area,press ENTER. The unit will reboot to initialize with the new setting.
BAND NAME FREQUENCY RANGE
AMERICA 1 FM:87.5-107.9MHz AM:530-1710kHz
AMERICA 2 FM:87.5-108MHz AM:520-1620kHz
AMERICA 3 FM:87.5-107.9MHz AM:530-1620kHz
EUROPE FM:87.5-108 MHz AM:522-1620kHz
MID EAST FM:87.5-108 MHz AM:531-1602kHz
AUST(AUSTRALIA) FM:87.5-108 MHz AM:522-1710kHz
RUSSIA FM:65.0-108 MHz AM:522-1620kHz
To change the range to suit your location, press DOWN ARROW until the desired frequency
range is hight lighted. The press ENTER to save it and move to next setting area.
- AUX Input Enable/Disable
Press DOWN ARROW to move between Enable and Disable modes.
When the selection has been made, press ENTER to save it and move to next setting area.
If AUX Input is disabled in System Settings, any input connected will not
be played.
- Clock Format (12-hour or 24-hour)
Press DOWN ARROW to move between 12-hour or 24-hour format,press ENTER to save it
and turn off this unit.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
To Previous Page
Loading...
Need help?
General
