Pyle PLRRR18U User Manual

3
INSTALLATION
Notes:
- Choose the mounting location
where the unit will not interfere
with the normal driving function
of the driver.
- Before installing the unit, connect
the wiring temporarily and make
sure it is all connected properly
and the unit and the system work
properly.
- Use only the parts included with
the unit to ensure proper
installation. The use of
unauthorized parts can cause
malfunctions.
- Consult with your nearest dealer
if installation requires the drilling
of holes or other modifications of
the vehicle.
- Install the unit where it does not
get in the driver’s way and
cannot injure the passenger if
there is an emergency stop.
- If installation angel exceeds
30°from horizontal, the unit might
not give its optimum
performance.
 Avoid installing the unit where it
would be subject to high
temperature, such as from direct
sunlight, or from hot air, from the
heater, or where it would be
subject to dust, dirt or excessive
vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed
either from “Front”(conventional DIN
Front-mount) or “Rear”(DIN
Rear-mount installation, utilizing
threaded screw holes at the sides of
the unit chassis). For details, refer to
the following illustrated installation
methods.
Installation Opening
This unit can be installed in any
dashboard that has the same
dimensions of opening as shown
below:
ATTENTIONS OF
INSTALLATION
1.This player should be installed
by professional technician.
2. please read the instruction
and operation of equipment
carefully before installing.
3. Make sure to connect other
wires before power connection.
4. To avoid short circuit. Please
make sure all the exposed wires
are insulated.
5. Please secure all the wires
after installation.
6. Please make proper
connections to the player
accordingly to this instruction
manual. Wrong connection may
cause damage.
7. This player only fit for 12V DC
device and please make sure
your car belongs to this kind of
cathode grounding electrical
system.
8. Please connect the wires
correctly. Wrong connection will
cause malfunction or damage.
30

Pyle PLRRR18U Specifications

General

Brand	Pyle
Model	PLRRR18U
Category	Car Receiver
Language	English