EasyManua.ls Logo

Pylontech Force-H1-V2 - Capacity Expansion

Pylontech Force-H1-V2
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
For long-term storage (more than 3 months), the battery cells should be stored in the
temperature range of 5~45, relative humidity <65% and contains no corrosive gas
environment.
The battery module should shelfed in range of 5~45, dry, clean and well ventilated
environment. Before storage the battery should be charged to 50~55% SoC;
It is recommended to active the chemical (discharge and charge) of the battery every 3 months,
and the longest discharge and charge interval shall not exceed 6 months.
Caution: If not follow the above instructions for long term store the battery, The cycle life
will have relative heavily reduction.
Capacity expansion
A new battery module can be add onto an existing system at any time. Please make sure the
existing system is being fully charged before add on a new module. In a serial connection
system, the new module, even has a higher SOH, will follow the system worst SOH condition
module to perform.

Related product manuals