Pylontech Force-H1 User Manual

9/34
2.2.3 Control Module FC0500-40 (internal power supply)
Control Module (FC0500-40) Display Panel
LED Button
Short Press
Display the LED panel for 20sec.
Long Press
(more than
5sec)
When status LED fast flashes blue ●, loss the button, then it is
115200 baud rate of RS485.
When status LED fast flashes orange ●, loss the button, then it
is 9600 baud rate of RS485.
Status
2 colors, Blue and orange
Refer to [LED Indicators Instructions]

Pylontech Force-H1 Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	48 V
Capacity per Module	3.55 kWh
Operating Temperature	-10°C to 50°C
Communication	CAN, RS485
Warranty	10 years
Peak Discharge Current (3 seconds)	100 A
Charge Voltage	52.5 V - 54 V
Storage Temperature Range	-20°C to 60°C
IP Rating	IP20
Cycle Life	>6000 cycles