1/34
1. Safety
The Force-H1 is a high voltage DC system, operated by skilled/qualified personnel only. Read all
safety instructions carefully prior to any work and observe them at all times when working on with
the system.
Incorrect operation or work may cause:
➢
➢
⚫
⚫
training in the installation and commissioning of the electrical system, as well as the dealing
with hazards;
knowledge of this manual and other related documents;
knowledge of the local regulations and directives.
Skills of Qualified Personnel
Qualified personnel must have the following skills:
⚫
injury or death to the operator or a third party;
damage to the system hardware and other properties belonging to the operator or a third
party.
External bipole DC isolator
Altering the proprietary DC cable between the battery and the inverter does not void
the warranty of Force-H1 series.
⚫
External bipole DC
isolator is required to be installed between the inverter and Battery
System;
Rate Current： >60A
⚫
To Next Page
Loading...
