Pylontech Force-H1 User Manual

2/34
1.1 Symbol
Danger
Lethal voltage!
⚫ Battery strings will produce HIGH DC power and can cause a
lethal voltage and an electric shock.
⚫ Only qualified person can perform the wiring of the battery
strings.
Warning
Risk of battery system damage or personal injury
⚫ DO not pull out the connectors while the system is working!
⚫ De-energize from all multiple power sources and verify that
there is no voltage.
Caution
Risk of battery system failure or life cycle reduces.
Symbol
in label
Read the product and operation manual before operating the
battery system!
Symbol
in label
Danger! Safety!
Symbol
in label
Warning electric shock!
Symbol
in label
Do not place near flammable material
Symbol
in label
Do not reverse connection the positive and negative.

Pylontech Force-H1 Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	48 V
Capacity per Module	3.55 kWh
Operating Temperature	-10°C to 50°C
Communication	CAN, RS485
Warranty	10 years
Peak Discharge Current (3 seconds)	100 A
Charge Voltage	52.5 V - 54 V
Storage Temperature Range	-20°C to 60°C
IP Rating	IP20
Cycle Life	>6000 cycles