Pylontech Force-H1 User Manual

16
/34
3.4.1 Handling and placement of the battery module
Single battery module is 36kg. If without handling tools must have more than 2 men to handling
with it.
3.4.2 Handling and placement of the base
The base is light, single person can handle with it.
3.4.3 Selection of installation sites
A. Force-H1 system working temperature range: 0℃～50℃; Optimum temperature: 18℃～28℃.
Do not place the battery system in direct sun light. It is suggested to build sunshade equipment.
In cold area the heating system is required.
B. Force-H1 system must not be immersed in water. Cannot be placed the battery base in rain
or other water sources. As a suggestion, the base’s height should >300mm above the ground.
C. The base’s weight capacity should support the weight of whole battery system (130~300kg).

Pylontech Force-H1 Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	48 V
Capacity per Module	3.55 kWh
Operating Temperature	-10°C to 50°C
Communication	CAN, RS485
Warranty	10 years
Peak Discharge Current (3 seconds)	100 A
Charge Voltage	52.5 V - 54 V
Storage Temperature Range	-20°C to 60°C
IP Rating	IP20
Cycle Life	>6000 cycles