Getting started
6
Inserting Batteries
Please insert batteries in the TU and in the RCU's.
TU: Using screwdriver open master screw to release cover. Insert 4 x 1.5 Volt AA
Alkaline batteries. Re-install cover and tighten master screw using screw-driver.
RCU: Open transparent battery cover. Insert 9 Volt alkaline battery. Re-install
transparent battery cover.
RCU-16: Open transparent battery cover. Insert 9 Volt alkaline battery. Re-install
transparent battery cover.
Navigating the System
When the TU is in the main settings menu screen or the standby screen, pressing Esc
toggles between the two screens.
In any other screen, pressing Esc returns you to the previous screen.
To select a menu item, you can use either the Numeric Keypad or the Scrolling Key.
On the Numeric Keypad, press the number that corresponds to the menu item
number. Or, scroll down or up using the Scrolling Key until the desired menu item
number is highlighted and then press Enter.
To input a value in an entry, you can use either the Numeric Keypad or the
Scrolling Key. On the Numeric Keypad, press the desired number, or use the
Scrolling Key to raise/lower or change the current value. Press Enter to move to the
next entry or Esc to move to the previous entry (if you are in the first entry, pressing
Esc will bring you to the previous screen).
To Next Page
Loading...