Terminal Unit Menus
12
If you choose ONE BY ONE, the RCU X 16 will work as 16 different RCUs in one
group.
To teach the RCU X 16 its address:
On the RCU, press the Test and Pwr keys together. Green LED will go on first and
then red LED and both LED's will blink together.
On the TU, press Enter. RCU LEDs will light together for 1 second and then go off.
RCU address has been assigned. Insert address into the battery bay visible through
transparent battery cover.
Test 1 SEC.
To test the system:
Choose TEST 1 SEC. from the ADD UNITS menu. The following screen will be
displayed:
ONE SECOND TEST
Hit ESC to exit
Press Pwr on RCUs participating in event. RCUs Green and Red LEDs will blink
together synchronized in all RCUs.
SET UNITS
The SET UNITS option gives you the possibility to set the RCUs in the appropriate
mode.
When you choose SET UNITS, the following screen will be displayed:
1.SLEEP
2.WAKEUP
3.SET ALARM TIME
SLEEP
When you choose SLEEP from the SET UNITS menu, The following screen will be
displayed:
RCUs to sleep
ENTER active
ESC Exit
To Next Page
Loading...