Safety and Operational Instructions
3
Safety and Operational Instructions
The operation of fireworks or pyrotechnics when using the Pyrologic 2000 system is
identical to operation using appropriate wiring instead of the RF command link. All
applicable laws and regulations regarding fireworks operation must be strictly
adhered.
When you purchase the system the RCUs are in generic state. The RCUs have to be
assigned to a specific TU Master Key according to the instructions detailed in this
manual.
When using the system for the first time and until you have learned to operate the
system correctly, please attach LEDs instead of squibs to the RCU squib connections
and otherwise operate the system according to the standard operation instructions, in
order to verify that you have mastered each and every detail of system operation.
Under no circumstances open or tamper the system components. Warranty will void
if any unauthorized attempt will be done to open or tamper system units.
Coping with External Transmission Disturbances: Pyrologic 2000 is a wireless
system that is designed according to the FCC regulations. Please check the system to
verify that there is no external interference. UNDER NO CIRCUMSTANCES THE
SYSTEM WILL FIRE WITHOUT OPERATOR COMMAND.
To Next Page
Loading...