Operating the System
25
20:17:10
GROUP 1 RCU 01
##:##.# ##:##.#
AVAIL: ##
2. Press the PTT and press the Send key. As long as you hold the PTT, the
fireworks will fire in the pre-programmed order and timing. The command key
LED of any fired unit will turn from green to red. Any RCU that has
functioned will shut down automatically.
3. To stop an event press Hold. The TU will send a disarm command to the
RCUs. Any RCU that hasn't received yet a firing command will return to
Standby state with the red light blinking. The command key LEDs will get into
the following condition:
Key LED Color
Send Red
Ready Green
Hold Red
Group Green
Activation Keys
Time from start Time left
To Next Page
Loading...