EURO 46 Installation Manual
Page: 23
7.2.3 Adding the Internal Tag Reader (From the Engineer Menu)
Enter the engineers menu and scroll to 'ASSIGN KEYPADS/READERS' and press . Please see the
Programming Manual for more information.
7.2.4 Connecting the Internal Tag Reader Inputs
The above wiring example shows the connections for a Grade 2 KX15DQ PIR.
NOTE: The resistance values are fixed to 4K7 Alarm and 2K2 Tamper in the EURO-PROXI.
7.2.5 Using the Internal Tag Reader as Access Control/Entry Control
To Next Page
Loading...
