EURO 46 Installation Manual
Page: 27
7.4 Connecting The Zone Expander Module (EURO-ZEM8)
7.4.1 The EURO-ZEM8 Expander
EURO-ZEM8
The EURO-ZEM8 is an input expander that
supports 8 inputs.
It also supports NC (normally closed), DEOL
input and 3 Resistor (Grade 3) configurations.
The EURO 46 will support up to 4 x Zone
Expander Modules. Please see page: 4.
NOTE: To wire double pole, program the
resistor range to 4K7/2K2 in 'CHOOSE MODE'
of the Engineer menu.
7.4.2 EURO-ZEM8 Technical Specification
EURO-ZEM8 (Inertia Input Expander)
Input Voltage 9-15V
Current Consumption 45mA
Inputs NC, DEOL, 3 Resistor (Grade 3)
Normal 1k / 1k DEOL Range 4k7 / 2k2 DEOL Range 4k7 / 4k7 DEOL Range
Burglary Alarm 0k5 to 1k4 1k4 to 2k9 3k7 to 8k3
Fault 1k5 to 5k9 4k2 to 7k8 8k4 to 10k2
Masking (6k8) 6k to 8k1 8k to 11k3 10k3 to 14k9
Tamper 8k2 to 17k 11k6 to 22k 15k to 22k
Dimensions (plastic box) 173 x 125 x 32mm
Dimensions (PCB) 128 x 87 x 16mm
Colour and Casing White 3mm ABS with clear polycarbonate window
Security Grading 3
Indications LEDs: Power, OK and Fault
Temperature Storage: -20°C to +60°C
Certified: -10°C to +40°C
Nominal: -10°C to +50°C
Front and rear tamper protected
7.4.3 The EURO-ZEM8 Input Configuration
To Next Page
Loading...
