HF-90 Operation & Installation Guide
This display shows that Telcall hang-up has
been executed.
The HANGUP display will time-out after three seconds and
the default channel display will reappear.
This flashing display shows that you have
received a call from Station No. 6101.
If the hang-up command is not executed your call will still be in
progress until the auto time-out is activated.
After pressing the HASH key twice, your display will
appear as follows:-
Receiving a Telcall
When receiving a Telcall (from a telephone user) you will
hear the Selcall Alarm. In addition your display will flash
the Selcall ID of the station that is calling you - ie. the
Telephone Interconnect Station. For example:-
Telcall Resend
Please note that you can resend the last recorded Telcall
quickly and easily, by pressing the following keys in
sequence:- STAR, HASH, STAR.
Warning:
36
Section 6.2
To Next Page
Loading...