19
4
19
CONTENT
1. Safety precautions
2. Items packed with the unit
3. Activities for installing the air conditioner for the S-JA2518 models
4. Determining the location of the inside and outside unit.
4.1 Determining the location of the inside and outside unit for theS-JA2518
models.
4.2 Determining the location of the exterior unit for the S-JA2518 models.
5. Possibilities for installing the piping from the interior unit to The exterior unit.
6. Mounting the installation plate and making the piping feedthrough.
6.1 Mounting the installation plate of the interior unit.
6.2 Drilling the piping, condensation hose and cable feed-through.
7. Connection the coolant pipes.
7.1 Connecting and disconnecting the coolant pipes for the S-JA2518 models.
8. Connection the condensation drainage hose for the S-JA2518 models.
8.1 Connection the condensation drainage hose to the interior unit.
8.2 Drain joint installation.
9. Electrical work.
10. Connecting the electrical cables.
11. Evacuating the cooling system of the S-JA2518 models.
12. Checking the cooling system for leakage on the S-JA2518 models.
13. Topping up coolant for piping lengths above 05 metres.
14. Test running after installation.
Q_instal_S-JA2518 ('17) V2.indd 19 30-10-17 14:42
To Next Page
Loading...
Need help?
General
