B – Command Line Interface
Ping Command
B-28 59225-00 B
S
Ping Command
Initiates an attempt to communicate with another switch over an Ethernet network
and reports the result.
Authority None
Syntax ping
ip_address
Keywords ip_address
The IP address of the switch to query.
Examples The following is an example of a successful Ping command:
SANbox #> ping 10.20.11.57
Ping command issued. Waiting for response...
SANbox #>
Response successfully received from 10.20.11.57.
This following is an example of an unsuccessful Ping command:
SANbox #> ping 10.20.10.100
Ping command issued. Waiting for response...
No response from 10.20.10.100. Unreachable.
To Next Page
Loading...
Need help?
General
