4 – Installation
Installing a Switch
59225-00 B 4-7
A
4.2.5
Install the Management Application
You can manage the switch using SANsurfer Switch Manager as a standalone
application or as a part of SANsurfer Management Suite™. SANsurfer
Management Suite is QLogic’s integrated fabric management application,
managing both HBAs and switches.
If your switch was shipped with a SANsurfer Switch Manager Disk, refer to
“SANsurfer Switch Manager” on page 4-7 for instructions on how to install
SANsurfer Switch Manager.
If your switch was shipped with a SANsurfer Management Suite Disk, refer
to “SANsurfer Management Suite” on page 4-9 for instructions on how to
install and upgrade SANsurfer Management Suite.
Refer to the SANbox 1400 Series Switch Management User’s Guide for more
information about using, exiting, and uninstalling SANsurfer Management Suite
and SANsurfer Switch Manager.
4.2.5.1
SANsurfer Switch Manager
You can install SANsurfer Switch Manager on a Windows, Linux, Solaris, or
MacOS X workstation. To install SANsurfer Switch Manager from the SANsurfer
Switch Manager disk, close all programs currently running, and insert the
SANsurfer Switch Manager Installation Disk into the management workstation
CD-ROM drive.
For a Windows platform:
1. From the tabs on the top of the product introduction screen, click SANsurfer
Switch Manager.
2. Locate your platform in the table and click Install.
3. Double click on the Windows_5.00.xx.exe file to begin installation.
If the product introduction screen does not open in step 2, open the CD with
Windows Explorer and run the installation program with the following path:
Switch_Manager\Windows_5.00.xx.exe
To Next Page
Loading...
Need help?
General
