4 – Installation
Installing a Switch
4-8 59225-00 B
S
For a Linux platform:
Open the CD and run the installation program with the following path:
Switch_Manager/Linux_5.00.xx.bin
If there is no CD-ROM icon, do the following:
1. Open an xterm or other terminal window.
2. Mount the CD-ROM. From a shell prompt, enter the following command:
mount /mnt/cdrom
3. Change directory to location of the install program:
cd /mnt/cdrom/Switch_Manager/Linux
4. Enter the following command to make the install file executable:
chmod +x Linux_5.00.xx.bin
5. Execute the install program and follow the installation instructions:
./Linux_5.00.xx.bin
For a Solaris platform:
1. Open a terminal window. If the disk isn’t already mounted, enter the
following command:
volcheck
2. Move to the directory on the disk that contains the executable. Enter the
following command:
cd /cdrom/cdrom0/Switch_Manager
3. Add the package and follow the SANsurfer Switch Manager installation
instructions. Enter the following command:
Solaris_5.00.xx.bin
For a MacOS X platform:
1. Open the CD and move to the following folder:
Switch_Manager
2. Double click the application zip file (MacOSX_5.00.xx.zip). This will place
the install program on your desktop.
3. Locate the Install program icon on your desktop, execute it, and follow the
installation instructions.
To Next Page
Loading...
Need help?
General
