Qlogic SANbox 1400 Series Installation Guide

B – Command Line Interface
Show Setup Command
59225-00 B B-87
A
Show Setup Command
Displays the current SNMP and system settings.
Authority None
Syntax show setup
mfg
snmp
system
Keywords mfg
Displays manufacturing information about the switch.
snmp
Displays the current SNMP settings.
system
Displays the current system settings.
Examples The following is an example of the Show Setup Mfg command:
SANbox #> show setup mfg
Manufacturing Information
-------------------------
BrandName QLogic Corporation
BuildDate Unknown
PartNumber SANbox 1400
SerialNumber FAM0331000011
LicensedPorts 10
MACAddress 00:c0:dd:02:cc:17
PlanarPartNumber Unknown
SwitchSymbolicName SANbox
SwitchWWN 10:00:00:c0:dd:02:cc:16
SystemDescription SANbox 1400 FC Switch
SystemObjectID 1.3.6.1.4.1.1663.1.1.1.1.27

Qlogic SANbox 1400 Series Specifications

General

Brand	Qlogic
Model	SANbox 1400 Series
Category	Switch
Language	English