Qlogic SANbox 1400 Series Installation Guide

B – Command Line Interface
Reset Command
B-36 59225-00 B
S
Table B-8. System Configuration Defaults
Parameter Default
Ethernet Network Discovery Static
Ethernet Network IP Address 10.0.0.1
Ethernet Network IP Mask 255.0.0.0
Ethernet Gateway Address 10.0.0.254
Admin Timeout 30 minutes
InactivityTimeout 0
LocalLogEnabled True
RemotelogEnabled False
RemoteLogHostAddress 10.0.0.254
NTPClientEnabled False
NTPServerAddress 10.0.0.254
EmbeddedGUIEnabled True

Qlogic SANbox 1400 Series Specifications

General

Brand	Qlogic
Model	SANbox 1400 Series
Category	Switch
Language	English