B – Command Line Interface
Show Command
59225-00 B B-73
A
The following is an example of the Show Port command:
SANbox #> show port 1
Port Number: 1
------------
AdminState Online OperationalState Online
AsicNumber 0 PerfTuningMode Normal
AsicPort 1 PortID 0e0800
ConfigType GL PortWWN 20:08:00:c0:dd:03:d5:94
DiagStatus Passed RunningType E
EpConnState Connected MediaPartNumber PL-XPL-VC-SG3-22
EpIsoReason NotApplicable MediaRevision 1
IOStreamGuard Disabled MediaType 200-M5-SN-I
LinkSpeed 2Gb/s MediaVendor Unknown
LinkState Active MediaVendorID 00000485
LoginStatus LoggedIn SymbolicName Port8
MaxCredit 8 SyncStatus SyncAcquired
MediaSpeeds 1Gb/s, 2Gb/s, 4Gb/s XmitterEnabled True
ALInit 5 LIP_F8_AL_PS 0
ALInitError 0 LIP_F8_F7 0
BadFrames 0 LinkFailures 2
Class2FramesIn 0 Login 3
Class2FramesOut 0 Logout 2
Class2WordsIn 0 LoopTimeouts 1
Class2WordsOut 0 LossOfSync 2
Class3FramesIn 999 PrimSeqErrors 0
Class3FramesOut 540 RxLinkResets 1
Class3Toss 0 RxOfflineSeq 0
Class3WordsIn 29516 TotalErrors 628777
Class3WordsOut 8406 TotalLinkResets 6
DecodeErrors 628775 TotalLIPsRecvd 5
EpConnects 3 TotalLIPsXmitd 7
FBusy 0 TotalOfflineSeq 5
FlowErrors 0 TotalRxFrames 999
FReject 0 TotalRxWords 29516
InvalidCRC 0 TotalTxFrames 540
InvalidDestAddr 0 TotalTxWords 8406
LIP_AL_PD_AL_PS 0 TxLinkResets 5
LIP_F7_AL_PS 0 TxOfflineSeq 5
LIP_F7_F7 5
To Next Page
Loading...
