4 – Managing Switches
Configuring a Switch
4-16 59235-02 A
L
4.6.2
Switch Properties
To open the Switch Properties dialog, choose one of the following:
Open the faceplate display for the switch you be configuring. Open the
Switch menu and select Switch Properties.
Right-click a switch graphic in the faceplate display, and select Switch
Properties from the popup menu.
Use the Switch Properties dialog to change the following switch configuration
parameters:
Domain ID and Domain ID Lock
Syslog
Symbolic Name
Switch Administrative States
Broadcast Support
In-band Management
Fabric Device Management Interface
Figure 4-7. Switch Properties Dialog
To Next Page
Loading...
