How to use Ping Utility on QNAP QHora-321 Network Router?
To test network connectivity using the Ping Utility on your QNAP Network Router: 1. Log in to QuRouter. 2. Navigate to System > Diagnostics. 3. Configure the ping utility settings. 4. Select 'Ping IPv4'. 5. Choose the WAN interface. 6. Enter an IP address or domain name. 7. Specify the number of echo requests to be sent and received. 8. Click 'Ping IPv4'.
General| DSL WAN | No |
|---|---|
| Ethernet WAN | Yes |
| Networking standards | IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x |
| Concurrent connections | 50000 |
| Ethernet LAN data rates | 100, 1000, 2500 Mbit/s |
| Ethernet interface type | 2.5 Gigabit Ethernet |
| Flash memory | 4 MB |
| Certification | CE / FCC / VCCI / BSMI / RCM / CCC / UKCA |
| Storage media | Flash |
| Internal memory | 4096 MB |
| Processor model | CN9130 |
| Processor frequency | 2.2 MHz |
| Internal memory type | DDR4 |
| Processor manufacturer | Marvell |
| Internal storage capacity | 4 GB |
| Web-based management | - |
| Output voltage | 12 V |
| Power source type | DC |
| Power consumption (typical) | 36 W |
| Package weight | 1350 g |
| Cables included | AC, LAN (RJ-45) |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Ethernet LAN (RJ-45) ports | 6 |
| Product color | White |
| VPN support | L2TP, WireGuard, OpenVPN, QBelt |
| Firewall security | TCP, UDP, ICMP, TCP+UDP |
Weight and Dimensions| Depth | 145.7 mm |
|---|---|
| Width | 166.4 mm |
| Height | 29.85 mm |
| Weight | 810 g |
Details the physical and technical specifications of the QHora-321.
Lists the software features and capabilities of the QHora-321.
Outlines environmental and hardware conditions for router installation.
Provides step-by-step instructions for initial QHora-321 router setup.
Guides connecting the QHora-321 router to the internet service provider.
Explains accessing the router interface using a web browser.
Details using Qfinder Pro to locate and access the QNAP router.
Lists default IP addresses for router's LAN interfaces.
Explains router LED indicators and their meanings.
Describes using the reset button to restore factory defaults.
Lists hardware and software needed to access QuRouter.
Provides initial steps for using QuRouter, including login and basic configurations.
Guides through the initial router setup process using the web interface.
Explains linking the router to a QNAP ID for enhanced features.
Explains elements and functions of the QuRouter taskbar.
Describes the QuRouter dashboard for monitoring network status and device information.
Manages router settings like device name, restart, reset, backup, and restore.
How to restore router settings from a backup file.
Configures audio alerts and device access control for security.
Manages local account settings and views system event logs.
How to check for and install firmware updates automatically.
Steps for manually downloading and installing firmware updates.
Guides configuration of WAN interface settings for internet connectivity.
Configures DNS server settings and IPv6 network parameters.
Guides configuration of LAN interface settings.
Configures DHCP server and reserves IP addresses for devices.
Configures IPv6 addressing assignment for network clients.
Finds QNAP devices and introduces VLAN configuration.
How to add a VLAN interface for the WAN connection.
Manages VLAN settings, including adding and deleting VLANs.
How to remove a configured VLAN from the router.
Steps to add a static route for IPv4 traffic.
Steps to add a static route for IPv6 traffic.
Modifies and removes existing static routes.
Adds, configures, and removes devices from the client block list.
Introduction to QuWAN, QNAP's SD-WAN solution.
Guides router configuration for QuWAN SD-WAN.
How to access the QuWAN Orchestrator management platform.
Configures QBelt VPN server settings via QuWAN Orchestrator.
Overview of QVPN server configuration options for VPN services.
How to enable and configure the QBelt VPN server.
Steps to enable and configure an L2TP VPN server.
Steps to enable and configure an OpenVPN server.
Steps to enable and configure a WireGuard VPN server.
How to add users to the QVPN service.
How to configure QVPN clients to connect to VPN servers.
How to create connection profiles for OpenVPN clients.
How to activate the QVPN client service.
How to remove an OpenVPN connection profile.
How to view and clear QVPN server and client logs.
Manages custom network service ports and adds custom services.
How to configure Dynamic DNS settings for remote access.
How to change the DDNS domain name.
Manages firewall rules for controlling network traffic and permissions.
Explains NAT for private networks to connect to the internet.
How ALG facilitates transparent network translation for protocols.
Manages port forwarding rules to direct traffic to specific devices.
Sets up a DMZ for public services while enhancing security.
Manages web content filtering roles and assignments.
Improves network traffic shaping by classifying and prioritizing traffic.
Lists QNAP resources for support and documentation.
Tests network connectivity using ping and traceroute utilities.
How to use remote support for troubleshooting with QNAP.
Details product warranty and legal disclaimers.
Includes FCC and EU RED compliance information.
Lists regulatory compliance statements for various regions and standards.
To Next Page
