QNAP QSW-M3212R-8S4T - System Management; System Settings

DSCP Values Queue
40-47 5
48-55 6
56-63 7
1. Log in to QSS.
2. Go to Conguration > QoS > DSCP Mapping .
3. Assign a queue number to each DSCP value.
4. Click Save.
QSS saves the mappings.
System management
The System section provides access to device conguration options.
System settings
The System Settings menu contains system conguration options such as system information, IP
information, password settings, secure connection settings, and time settings for the switch.
Changing the switch name
1. Log in to QSS.
2. Go to System > System Settings > System Information .
3.
Click
.
4. Specify the switch name.
Requirements:
• Length: 1–32 characters
• Valid characters: A–Z, a–z, 0–9
• Valid special characters: Hyphen (-)
5.
Click to conrm the switch name.
QSS updates the switch name.
Conguring the switch IP information
1. Log in to QSS.
2. Go to System > System Settings > IP .
3. Select the management access mode.
• In-band: Allows users to access QSS through the ports on the switch that is also used for network
trac management.
QSW Managed Switches User Guide
QSS 26