QNAP QSW-M3212R-8S4T - Firmware Update

2. Go to System > System Settings > HTTPS .
3. Select Enable Secure Connection (HTTPS).
4. Select a TLS version.
Note
Select the latest version of TLS to maximize system security. Ensure that your system meets the
TLS requirements to avoid compatibility issues.
5. Optional: Select Force secure connections (HTTPS) only.
Note
After enabling this setting, you can only access the web administration page via HTTPS.
6. Click Save.
QSS saves the secure connection settings.
Restarting the switch
1. Log in to QSS.
2.
Click
located on the upper-right corner of the page.
3. Click Restart Switch.
A conrmation message appears.
4. Click Yes.
QSS restarts the switch.
Viewing the switch information
To view the hardware and system information of the switch, go to System > System Information .
The screen provides the following information.
Information Description
Switch name Displays the default or modied name of the device
Model name Displays the model name of the switch
MAC address Displays the MAC address of the switch
IP address Displays the DHCP or static IP address of the switch
System uptime Displays how long the system has been operational
Current rmware version Displays the rmware image version of the switch
Firmware update
QNAP recommends keeping your device rmware up to date. This ensures that your device can benet from
new QSS software features, security updates, enhancements, and bug xes.
You can update the switch rmware using one of the following methods:
QSW Managed Switches User Guide
QSS 30