QNAP QSW-M3212R-8S4T - Page 29

• Scheduled tasks run at the correct time.
1. Log in to QSS.
2. Go to System > System Settings > Time .
3. Specify the time zone.
4. Specify the time conguration.
Setting Description
Synchronize with internet time
server
Ensure that your device is connected to the internet, and then specify
the following information:
Server: Specify the Network Time Protocol (NTP) server.
Examples: time.nist.gov, time.windows.com
Manual conguration Specify the date and time.
5. Congure the Daylight Savings Time (DST) settings.
• Disable: Disables the DST settings
• Adjust the system clock automatically: Allows the internal clock of the switch to congure the
DST settings.
• Adjust the system clock manually: Allows you to manually congure the starting time, ending
time, and the oset settings.
6. Click Save.
QSS updates the time settings.
Backing up system settings
1. Log in to QSS.
2. Go to System > System Settings > Backup & Restore .
3. Click Backup.
The device exports the system settings as a BIN le and downloads the le to your computer.
Restoring system settings
Warning
If the selected backup le contains user or user group information that already exists on
the device, the system will overwrite the existing information.
1. Log in to QSS.
2. Go to System > System Settings > Backup & Restore .
A le explorer window opens.
3. Click Browse.
4. Select a valid BIN le that contains the device system settings.
5. Click Restore.
QSW Managed Switches User Guide
QSS 28