Installation Requirements
Category Item
Environment • Room temperature: 0 to 40˚C (32 to 104˚F)
• Non-condensing relative humidity: 5 to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface with no exposure to direct sunlight, liquids,
and chemicals
Hardware and peripherals • Storage drives
• Network cable
Tools Anti-static wrist strap
Setting Up the NAS
1. Place your NAS device in an environment that meets the requirements.
2. Install the drives.
For details, see Installing 3.5-inch Hard Drives.
3. Connect the power cord and all applicable cables.
4. Power on the NAS.
5. Install QTS.
For details, see QTS Installation.
6. Log on to QTS.
TS-x28A User Guide
Product Overview 6
To Next Page
Loading...
