QNAP TS-410 User Manual

10.3 2U Turbo NAS (except TS-1279U-RP and TS-EC1279U-RP)
T
he following instructions should only be performed by an authorized and trained
technician.
To replace a failed power supply unit on a 2U Turbo NAS, follow the steps below.
1. Turn off the NAS.
2. Unfasten the screw on the failed power supply in an anticlockwise direction.
3. Unplug the failed power supply.
54

QNAP TS-410 Specifications

General

CPU	Marvell 6281
CPU Frequency	800 MHz
Flash Memory	16 MB
Drive Bays	4
LAN Ports	1 x Gigabit RJ-45 Ethernet port
Dimensions	177 x 180 x 235 mm
Weight	3.6 kg
Hot Swappable	Yes
RAID Support	RAID 0, 1, 5, 6, JBOD
USB Ports	3 x USB 2.0
eSATA Ports	2
Maximum Internal Raw Capacity	16 TB (4 x 4 TB hard drives)