EasyManuals Logo

QNAP TS-453E User Manual

QNAP TS-453E
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
LED Status Description
System status
and power
Flashes green and red
alternately every 0.5
seconds
The drive is being formatted.
The device is being initialized.
The operating system is being updated.
RAID rebuilding is in progress.
Online RAID Capacity Expansion is in progress.
Online RAID Level Migration is in progress.
Red The drive is invalid.
The disk volume has reached its full capacity.
The disk volume is about to reach its full capacity.
The system fan is not functioning.
An error occurred when accessing (read/write) the
data.
A bad sector is detected on the hard drive.
The device is in degraded read-only mode (two
member drives failed in RAID 5 or RAID 6 but the data
can still be read).
A hardware self-test error occurred.
Flashes red every 0.5
seconds
The device is in degraded mode (one member drive failed
in RAID 1, RAID 5, or RAID 6).
Flashes green every 0.5
seconds
The device is not congured.
A drive is not formatted.
Green The device is ready.
O All drives are in standby mode.
The device is powered o.
LAN Orange A network connection has been established.
Flashes orange The device is being accessed from the network.
O The device is not connected to a network.
USB One Touch
Copy
Flashes blue every 0.5
seconds
A USB device connected to the USB One Touch Copy
port is detected.
A USB device connected to the front USB port is being
removed from the device.
A USB device connected to the front USB port is being
accessed.
Blue A USB device is detected in the front USB port.
O No USB device is detected.
The NAS has nished copying data to or from the USB
device connected to the front USB port.
TS-x53E User Guide
Basic Operations 35

Other manuals for QNAP TS-453E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-453E and is the answer not in the manual?

QNAP TS-453E Specifications

General IconGeneral
GPUIntel UHD Graphics
Flash Memory4 GB (Dual boot OS protection)
Drive Bays4 x 3.5-inch SATA 6Gb/s, 3Gb/s
Hot-swappableYes
M.2 SSD Slot2 x M.2 2280 PCIe Gen3 x1
SSD Cache Acceleration SupportYes
Network Interface2 x 2.5GbE RJ45
Form FactorTower
LED IndicatorsStatus, LAN, USB, HDD 1-4
Kensington Security SlotYes
Operating SystemQTS 5.0
ProcessorIntel Celeron J6412
CPU Architecture64-bit x86
Memory8 GB DDR4 (4 GB x 2)
Memory Slot2 x SO-DIMM
Drive Compatibility3.5-inch SATA hard disk drives, 2.5-inch SATA solid state drives
Maximum Internal Raw Capacity64 TB (16 TB drive x 4)
ButtonsPower, Reset
Power Supply Unit100-240V
Fan1 x 120mm
Operating Temperature0°C to 40°C (32°F to 104°F)
Operating Humidity5% to 95% RH

Related product manuals