EasyManuals Logo

QNAP TS-453E User Manual

QNAP TS-453E
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Setting Description
Password Specify a password that contains 1 to 16 characters from any of the
following groups:
Letters: A to Z, a to z
Numbers: 0 to 9
Special characters: . - _ ~ ! @ # $ % ^ & ( ) { }
Does not start or end with a space.
Port Specify a port number to access the RTRR server.
7. Click Apply.
A conrmation window appears.
8. Click OK.
The remote server settings are completed.
Creating a One-Way Sync Job
1. On the source NAS, go to App Center > HBS 3 > Sync .
2. Click Sync Now.
3. Select One-way Sync Job.
The Create a Sync Job window appears.
4. Click Remote NAS.
5. Click Add New Account.
The Create a Storage Space window appears.
6. Select the destination NAS as the destination storage space and specify the following:
Setting Description
Name The name used to identify the storage space.
IP address / Host name The IP address or hostname used to access the storage space.
Tip
Click to scan for available devices.
Port The port number used to access the storage space.
This value must be between 1 to 65535.
Password The password used to access the storage space.
Use SSL connection Requires SSL connection when accessing the remote NAS.
7. Optional: Test the connection.
Test Description
Detect Server Tests the accessibility of the selected storage space.
Speed Test Tests the network connection speed of the selected storage space.
8. Click Create.
9. Click Select.
TS-x53E User Guide
NAS Migration 41

Other manuals for QNAP TS-453E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-453E and is the answer not in the manual?

QNAP TS-453E Specifications

General IconGeneral
GPUIntel UHD Graphics
Flash Memory4 GB (Dual boot OS protection)
Drive Bays4 x 3.5-inch SATA 6Gb/s, 3Gb/s
Hot-swappableYes
M.2 SSD Slot2 x M.2 2280 PCIe Gen3 x1
SSD Cache Acceleration SupportYes
Network Interface2 x 2.5GbE RJ45
Form FactorTower
LED IndicatorsStatus, LAN, USB, HDD 1-4
Kensington Security SlotYes
Operating SystemQTS 5.0
ProcessorIntel Celeron J6412
CPU Architecture64-bit x86
Memory8 GB DDR4 (4 GB x 2)
Memory Slot2 x SO-DIMM
Drive Compatibility3.5-inch SATA hard disk drives, 2.5-inch SATA solid state drives
Maximum Internal Raw Capacity64 TB (16 TB drive x 4)
ButtonsPower, Reset
Power Supply Unit100-240V
Fan1 x 120mm
Operating Temperature0°C to 40°C (32°F to 104°F)
Operating Humidity5% to 95% RH

Related product manuals