7. Power on the NAS.
Replacing Memory Modules
The NAS has two memory slots. You can increase the memory capacity of the NAS by upgrading the
memory module. Use only QNAP modules of the same type and capacity to maintain system performance
and stability. You can purchase QNAP memory modules from authorized resellers.
Important
Ensure that each pair uses identical modules.
For details on slot numbering, see Right Panel.
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the NAS.
TS-x53D User Guide
Installation and Configuration 22
To Next Page
Loading...
