QNAP TS 53D Series User Manual

12. Connect all cables and external attachments.
13. Connect the power cord to the electrical outlet.
14. Power on the NAS.
Installing Expansion Units
The TS-x53D supports USB and SATA JBOD expansion units. For details, please see table below.
Note
For details on expansion unit compatibility and maximum expansion units supported, go to
https://www.qnap.com/en/compatibility-expansion/
Expansion Unit Model Description Required Accessories
TR-002 • Uses a USB 3.2 Gen 2 Type-C
interface
• Supports SATA
USB 3.2 Gen 2 Type-A to Type-C
cable
TR-004 • Uses a USB 3.2 Gen 1 Type-C
interface
• Supports SATA
USB 3.2 Gen 1 Type-A to Type-C
cable
TL-D400S • Uses an SFF-8088 interface
• Supports SATA HDD/SSD
• 1 x SFF-8088 connector cable
• QXP-400eS-A1164 host bus
adapter
TL-D800S • Uses an SFF-8088 interface
• Supports SATA HDD/SSD
• 2 x SFF-8088 connector
cables
• QXP-800eS-A1164 host bus
adapter
TS-x53D User Guide
Installation and Configuration 35

QNAP TS 53D Series Specifications

General

Brand	QNAP
Model	TS 53D Series
Category	Storage
Language	English