QNAP TS-AI642 Repair Manual

c. Remove the backplane cable from the cable clips on the backplane tray.
8. Remove the power supply unit.
a. Remove the screws securing the power supply unit to the base chassis.
Note
• The at head M3x4 screws on the rear chassis require a Philips #2 screwdriver.
• The at head M3x4 screws on the base chassis require a Philips #2 screwdriver.
| NAS Repair Manual
Category C NAS Models 65

QNAP TS-AI642 Specifications

General

Brand	QNAP
Model	TS-AI642
Category	Storage
Language	English