Component TS-h1886XU-RP-R2-D1622-32G
PCIe slots • Slot 1: PCIe Gen 2.0 x4 (x8 slot)
• Slot 2: PCIe Gen 3.0 x4
Note
Slot 3 speed reduces from x8 to x4 when an expansion
card is installed in slot 2.
• Slot 3: PCIe Gen 3.0 x8 or x4 (x8 slot)
Note
A dual-port 10 GbE SFP+ network expansion card is
pre-installed in PCIe slot 3.
Important
Certain PCIe slot lengths are aected by the
installation of expansion cards in neighboring PCIe
slots. For details, see Replacing Expansion Cards.
Tip
For the list of compatible drive models and expansion
cards, go to https://www.qnap.com/compatibility.
USB ports 2 x USB 3.2 Gen 1 Type-A
Interface
Buttons • Power
• Reset
Dimensions
Form factor 2U Rackmount
Dimensions (H x W x D) 88.3 x 482 x 549.7 mm
(3.48 x 18.98 x 21.64 in)
Net weight 12.73 kg (28.06 lbs)
Others
Rail compatibility RAIL-B02
Note
• Rail kits are not included with the NAS and
must be purchased separately. For details,
contact an authorized reseller or go to https://
shop.qnap.com.
• Information on rail kit installation can be found
in the installation guide included in the rail kit
package.
Power supply unit TS-h1886XU-RP-R2: 2 x 550W, 100-240V AC, 50/60 Hz
System battery CR2032 lithium battery (3V, 225 mAh)
TS-h1886XU-RP User Guide
Product Overview 6
To Next Page
Loading...
Need help?
General