QNAP TS-h1886XU-RP-R2 User Manual

Note
This image shows the NAS connected to TL-R1200-RP USB expansion units.
2. Power on the expansion units.
3. Verify that the expansion units are recognized by the NAS.
a. Log on to QuTS hero as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > System .
c. Verify that the expansion units are listed.
QuTS hero Installation
The TS-h1886XU-RP-R2 uses the QNAP QuTS hero operating system. You can install QuTS hero using any of
the following methods:
Method Description Requirements
Qnder Pro
installation
(Recommended)
If the NAS is connected to your local area
network, you can do the following:
• Locate the NAS using Qnder Pro.
• Complete the steps in the Smart
Installation Guide wizard.
For details, see Installing QuTS hero
Using Qnder Pro.
• Computer
• Network cable
• Qnder Pro installer
TS-h1886XU-RP User Guide
Installation and Conguration 34

QNAP TS-h1886XU-RP-R2 Specifications

General

Brand	QNAP
Model	TS-h1886XU-RP-R2
Category	Storage
Language	English