QNAP TS-i410X User Manual

• On your computer, go to your respective region's site to download QTS:
• China: https://install.qnap.com.cn
• Global: https://install.qnap.com
• Scan the QR code on the NAS using a mobile device.
The web page lists all the uninitialized QNAP NAS devices on the local network.
4. Find your NAS from the list and then click Initialize.
Note
If your NAS is not listed, follow the instructions on the web page to specify the Cloud Key on the
NAS.
The installation wizard opens in the default web browser
5. Create an account or sign in to myQNAPcloud.
Note
You must return to this page to complete the installation after creating an account.
6. Specify the myQNAPcloud device name for the NAS.
Note
• The myQNAPcloud device name is used when remotely accessing the NAS.
• For security purposes, the myQNAPcloud Link remote connection service will be disabled
on your NAS after initialization. You can enable it by connecting to QTS through LAN and
then installing myQNAPcloud Link.
7. Click Next.
The QNAP Warranty Service page opens in the default web browser.
8. Click Check warranty.
The QNAP Warranty Service window opens in a new web page.
Important
You can check your device warranty policy or purchase an extended warranty plan at QNAP
Warranty Service.
9. Close the warranty page.
The Smart Installation Guide opens in the default web browser.
10. Specify the following information.
• NAS name: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
• Username: Specify an administrator username that contains 1 to 32 characters. The name
supports letters (A to Z, a to z), numbers (0 to 9), and hyphens (-), multi-byte Chinese, Japanese,
Korean, and Russian characters.
The username cannot contain the following special characters: grave accent (`), asterisk (*), equal
sign (=), plus sign (+), square brackets ([ ]), backslash (\), vertical bar (|), semicolon (;), colon (:),
apostrophe ('), quotation mark ("), comma (,), less than sign (< ), greater than sign (>), slash (/),
question mark (?), percent sign (%), or "admin".
TS-i410X User Guide
Installation and Conguration 18

QNAP TS-i410X Specifications

General

RAID levels	0, 1, 5, 6, 10, JBOD
RAID support	Yes
Storage drive capacity	0 GB
Supported file systems	FAT32, HFS+, exFAT, ext3, ext4
Storage drive interface	-
Storage drives installed	No
Storage drive sizes supported	2.5 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	4
Supported storage drive interfaces	Serial ATA III
Operating system version	5.0.1
Operating system installed	QNAP QTS
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Ethernet LAN data rates	1000, 2500, 5000, 10000 Mbit/s
Copper ethernet cabling technology	10BASE-T
Storage temperature (T-T)	-45 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Type	NAS
Device class	Small & Medium Business
Backup features	Cloud, iSCSI LUN
Browser supported	Apple Safari, Google Chrome, Microsoft Edge, Mozilla Firefox
Output voltage	9 - 36 V
AC input voltage	100 - 240 V
Power supply location	External
Power consumption (sleep)	17.628 W
Power consumption (typical)	25.592 W
Power supply unit (PSU) capacity	90 W
Chassis type	Tower
Cooling type	Passive
Product color	Black
LED indicators	LAN, Power, SSD, Status
Cable lock slot type	Kensington
HDMI version	1.4b
Ethernet LAN (RJ-45) ports	2
Processor model	x6425E
Processor family	Intel Atom®
Processor frequency	3 GHz
Processor manufacturer	Intel
Flash memory	4096 MB
Internal memory	8 GB
Cables included	AC, LAN (RJ-45)
Number of screws	16

Weight and Dimensions

Depth	254 mm
Width	180 mm
Height	65 mm
Weight	2540 g
Package weight	3730 g