Need help?Do you have a question about the qpcom QP-WA257GHP and is the answer not in the manual?
Ensures compliance with FCC RF radiation exposure limits for uncontrolled environments, requiring 20cm distance.
Product is Class B, may cause radio interference in domestic settings, requiring user measures.
Lists key features like dual LAN ports, WPA support, client mode, WDS, PoE, and MAC filtering.
Illustrates connecting PCs and USB devices to the Access Point via a broadband router for Internet access.
Shows connecting PCs via PC Cards to the Access Point for extending network connectivity.
Details how to connect the Access Point using the included AC power adapter and an Ethernet cable.
Explains the hardware connection process when using Power over Ethernet (PoE) for power supply.
Device connects wireless stations to a wired network, providing Internet access to all stations.
Allows APs to communicate wirelessly, enabling Station 1 to communicate with Station 2.
Device acts as a wireless station connected to a computer via wired end.
Device acts as a wireless station, enabling file and printer sharing between wireless stations.
Acts as AP and repeater to build large wireless networks or bridge networks between buildings.
Details the steps to access the web-based configuration utility by entering the IP address in a browser.
Displays current settings and status, including Uptime, Firmware Version, Wireless Configuration, and TCP/IP Configuration.
Configure primary wireless parameters like SSID, Channel Number, Band, and Mode.
Configures authentication methods like Open System or Shared Key for network security.
Adjusts packet splitting for efficiency in high traffic wireless networks.
Mitigates 'Hidden Node' problems by controlling data transmission requests.
Sets the time between beacon transmissions for power saving and synchronization.
Configure wireless security settings, including encryption, authentication, and access control methods.
Selects the mode for Wireless Access Control: Disable, Allow Listed, or Deny Listed.
Specifies the MAC address of a station to allow or deny access to the Access Point.
Set a new password for accessing the Access Point's web server for enhanced security.
Configure system log settings, enabling logs for system events or wireless-only events.
General| Brand | qpcom |
|---|---|
| Model | QP-WA257GHP |
| Category | Wireless Access Point |
| Language | English |
To Next Page