136 | Experiencing Multimedia
• Image tab. This field provides image-related settings for captured
files.
• Prefix type and Prefix string. By default, the file name of
each new captured image file is set to “IMAGE” followed by
a sequential number, for example: IMAGE_00001.jpg. To
change this prefix, select String in the Prefix type list, then
enter the desired characters in the Prefix string box.
• Counter Index. By default, the newly captured image files are
named with a prefix and some sequential numbers, such as
00000, 00001, 00002, and so on. To reset the numbering to
“00001” for your captured image files, tap Reset counter.
• JPEG Quality. Select the JPEG image quality level for all
captured still images. You can choose from SuperFine, Fine,
Normal, and Basic.
• Self-Timer. Select the Self-Timer option for capturing images:
Off, 5 seconds, or 10 seconds. Selecting 5 seconds or 10
seconds delays the capturing by the specified time after you
press CAMERA or ENTER.
• Video Tab. The options in this field are for configuring the
advanced settings of the captured video files.
• Prefix type and Prefix string. By default, the file name of
each new, captured video file is set to “VIDEO” followed by a
sequential number, for example: VIDEO_00001.avi. To change
this prefix, select String in the Prefix type list and enter the
desired characters in the Prefix string box.
• Counter Index. By default, the newly captured video files are
named with a prefix and some sequential numbers, such as
00000, 00001, 00002, and so on. To reset the numbering to
“00001” for your captured video files, tap Reset counter.
• Recording with Audio. Select this check box to record audio
with the captured video clips. This check box is selected by
default. If you clear this check box and then capture a video
clip, it would have no audio.
To Next Page
Loading...
Need help?
General