Trigger Connections
If you have a Quad Artera system, we advise connecting the trigger. This will enable all Artera units to be brought in and out of
standby along with trigger inputs and outputs.
To connect the triggers, you will need a cable with one end to match the trigger input of the slave unit and other terminating in a
3.5mm jack plug. For Artera series units, this will be a 3.5mm to 3.5mm interconnect.
The triggers on the Artera Solus Play are master (output) triggers. They are used exclusive to control other equipment.
Connect the TRIG OUT of Artera Solus Play to the “TRIG IN” of Artera Stereo or other Artera series unit, or any other slave unit
having a 12V trigger in.
10
Artera Solus Play Artera Stereo
IMPORTANT
SAFETY INFORMATION
REMOTE
HANDSET
CONTROLS AND
FUNCTIONS
CONNECTIONS
SYSTEM
OPERATIONS
DTS PLAY-FI
®
WIRELESS...
MENU
OPTIONS
SPECIFICATIONS CONTENTSINTRODUCTION
WARRANTY
COVERAGE
To Next Page
Loading...
