quadient 200 Series User Manual

1
200 Series Conveyor Operator Manual Issue 1 May 2011
Table Of Contents
1 Introduction ........................................................................................ 2
1.1 Pictograms ........................................................................... 2
1.2 Notes on the use of this handbook ........................................... 3
2 Safety notes ........................................................................................ 3
2.1 General safety notes .............................................................. 4
2.2 End of life ............................................................................ 5
3 Description of machine ........................................................................ 7
3.1 Description of operation ......................................................... 7
3.2 Identication of parts ............................................................. 8
3.2.1 Angled (Default) Version ........................................... 8
3.2.2 Inline Version .......................................................... 9
4 Machine Setup ................................................................................... 10
4.1 Angled Version .....................................................................10
4.2 Inline Version ......................................................................11
4.3 Backrest adjustment .............................................................11
5 Using the Conveyor ............................................................................ 12
5.1 Output settings ....................................................................12
5.2 Adjusting the speed ..............................................................13
6 Technical Specication ...................................................................... 14
6.1 Physical sizes .......................................................................14
6.2 Electrical .............................................................................14
7 Troubleshooting Guide ....................................................................... 15

quadient 200 Series Specifications

General

Brand	quadient
Model	200 Series
Category	Postal Equipment
Language	English

Summary

Introduction

Pictograms

Explanation of warning symbols and information icons used in the manual.

Handbook Usage Guidelines

Instructions on how to read and use the handbook for effective operation and reference.

Safety Notes

General Safety Precautions

Covers installation, electrical hazards, operating safety, and cleaning procedures.

End of Life Procedures

Guidance on proper disposal and environmental considerations for the equipment.

Description of Machine

Operational Overview

Details the conveyor's role in receiving and stacking mailpieces from an inserter.

Identification of Parts

Identifies key components of the conveyor system.

Angled (Default) Version Identification

Diagram and labels for the Angled (Default) conveyor configuration.

Inline Version Identification

Diagram and labels for the Inline conveyor configuration.

Machine Setup

Angled Version Setup

Adjusting the backstop and roller plate for the Angled conveyor version.

Inline Version Setup

Adjusting rollers and roller plate for the Inline conveyor version.

Backrest Adjustment

Adjusting the backrest tilt for stacking envelopes at the end of the conveyor.

Using the Conveyor

Output Settings Configuration

Defining batch settings, pause times, and jog steps for conveyor operation.

Adjusting Conveyor Speed

Modifying conveyor speed using the Fine Tuning settings and Conveyor Pulse Multiplier.

Technical Specification

Physical Dimensions and Speed

Specifications for overall sizes, length, width, height, and maximum linear speed.

Electrical Ratings

Information on voltage, power consumption, and fuse for the conveyor.

Troubleshooting Guide