quadient IS-330 - Installing The Ink Cartridge; Remove Ink Cartridge; Open Machine Cover; Insert Ink Cartridge

4 – Installing The Ink Cartridge
Installing the ink cartridge into the base of the mailing machine.
This process consists of:
- Removing the ink cartridge from the packaging.
- Inserting the ink cartridge into the mailing machine.
A B
E
C
Remove the ink cartridge from
the packaging.
- Take ink cartridge out of the
packaging.
- Remove the film strip attached to
the bottom of the ink cartridge.
Open the mailing machine’s cover.
- Lift top cover by pulling the open slot.
Insert the ink cartridge into the mailing
machine.
- Position the cartridge with the contacts
facing the rear.
- Slide the ink cartridge in to the ink
cartridge slot located on the right side.
- With your thumb ‘click’ the cartridge
towards the back of the machine to the
locked position.
- Close the mailing machine cover.