Use r’ s M a nual
Chapter 5
Driver Installation
If your KEMX-1750 series does not come with an operating system pre-installed,
you will need to install an operating system and the necessary drivers to operate it.
After you have finished assembling your system and connected the appropriate
power source, power it up using the power supply and install the desired operating
system.
You can download the drivers for the KEMX-1750 series from the Quanmax website
at www.quanmax.com and install as instructed there. For other operating systems,
please contact Quanmax.
NOTE
When the system reboots without connecting the CRT, there might be no
image on screen when you insert the CRT/VGA cable. Please
press ing <Ctrl>+<Alt>+<F1> simultaneously to show the image on screen.
To Next Page
Loading...
