802BT/802R Video Test Generator User Guide 189
Testing HDCP with static images
The standard HDCP test images have color bars in the background. A special mode is
available for testing HDCP with any static background image you specify.
To test HDCP with a different background image:
1. Turn on the generator while holding down the G and ACS keys until hdcp tester is
displayed.
Alternatively, enter the following command:
SROP 8192
2. Select a format that is supported by the display, and then load any static image.
The HDCP test begins automatically when you connect the display.
If the HDCP test passed, the generator displays the image you specified. If the test
failed, the display will remain blank. See “Troubleshooting HDCP errors” on page 191.
To Next Page
Loading...
