Video Test Generator User Guide 261
CTLM
ConTroL Mask
Class Format parameter setting - Digital video signal
Description Sets the masked control bits for the LVDS output. The control bits are not always required
by receivers. There are two bits that can be set: CTL00 and CTL01.
Command syntax CTLM mask
mask
0 = sets bit low
1 = sets bit high
Query syntax CTLM?
Example
CTLM 2 // the 2 in hex sets the CTL01 bit to 1.
CTLM 3 // the 3in hex ets the CTL00 and CTL01 bits to 1.
Related commands RCTL
To Next Page
Loading...
