Video Test Generator User Guide 301
DVPT
Digital Video Protocol Type
Class Format parameter setting - Digital video signal
Description Controls the output protocol. Setting the DVPT parameter to 2 and issuing a FMTU (or
ALLU) command causes the output signal protocol to switch to HDMI, while setting DVPT
to 1 causes a DVI compatible protocol to be output. All of the formats in the format library
set DVPT to 0. This is a default setting, which lets the output protocol be determined, on a
global basis, by the type of hardware that is present.
Command syntax DVPT type
type
0 = default (based on hardware present)
1 = DVI 1.0
2 = HDMI 1.0
Example
DVPT 2
FTMU
To Next Page
Loading...
