Video Test Generator User Guide 477
PNSF
Pseudo Noise Signal Format
Class Signal Analyzer - Pseudo-random noise
Description Selects the source of timing information used by the various pseudo-random noise
parameters.
Command syntax PNSF source
source
0 = CURRENT (timing parameters are based on the internally-generated DVI signal)
1 = MEASURED (timing parameters are based on a measurement of the DVI signal
received at the DVI Input connector from an external signal source)
Query syntax PNSF?
Query response 0 or 1
Example
PNSF 0 // timing parameters are based on internal DVI signal
PNGU
Related commands PNGU
To Next Page
