506 Appendix A Command Reference
SAMP
Digital Audio Sinewave Amplitude
Class Sonic data generator
Description Sets the amplitude in decibels of the audio stream sinewave output by the generator.
Command syntax SAMP amplitude (sets all channels)
amplitude
-96.3 to 0 (if NBPA is 16-bits)
-120.4 to 0.0 (if NBPA is 20-bits)
-144.5 to 0.0 (if NBPA is 24-bits)
Query syntax SAMP?
Query response amplitude
Example
SAMP -60.0 // Sets all channels to -60 amplitude
FMTU
Related commands SRAT, SMIN?, SMAX?
To Next Page
